What are the precautions when arranging indoor lighting fixtures

      Indoor lighting is the main facility for indoor lighting. It provides decorative effects and lighting functions for indoor spaces. It can not only add new content to the more monotonous top color and shape, but also can change the shape of indoor lighting and the intensity of lighting. The adjustment and other means to achieve the effect of contrasting the indoor atmosphere and changing the structure of the room.

1. There are at least 4 lamps in the living room, kitchen lamps, bedroom lamps, etc. The installation of lamps and lanterns in the home decoration must be detailed, because it needs to be used for a long time and cannot be easily damaged, otherwise it will affect the family life. 

   
   

2. Before installation, the lamps and their accessories should be complete, and there should be no defects such as mechanical damage, deformation, paint peeling, and lampshade cracks. 

3. When installing electrical lighting devices in masonry structures, they should be fixed with pre-embedded hooks, bolts, screws, expansion bolts, nylon plugs or plastic plugs; wooden wedges are strictly prohibited. When the design is not specified, the carrying capacity of the above-mentioned fixing parts should match the weight of the electric lighting device.

4. According to the installation place and purpose of the lamps and lanterns, the minimum cross-section of the wire core leading to each lamp should comply with the relevant regulations.

5. In places with greater dangers and special dangers, when the height of the lamps from the ground is less than 2.4 meters, lighting lamps with a rated voltage of 36 volts and below should be used or protective measures should be taken. Lamps should not be installed directly on combustible objects; when the high temperature part of the surface of the lamp* is close to combustibles, heat insulation and heat dissipation measures should be taken. Lamps should not be installed directly above the high-voltage and low-voltage power distribution equipment and busbars in the substation. For outdoor lighting fixtures, the height from the ground should not be less than 3 meters; when installed on the wall, the height from the ground should not be less than 2.5 meters.

Part of the content of this article has been compiled from the network and shared. If there is any infringement, please contact the editor to delete it.