How to install LED ceiling light?

1. The ceiling opening where the led ceiling lamp is located

Use tools to open the ceiling according to the opening size of the corresponding lamp. Please be sure to perform the opening operation according to its size. Otherwise, the opening size will be too small, cannot be installed or the size is too large, and the LED ceiling light surface will appear. Gap.

2. LED ceiling lamp connection wire

Correctly connect the wires to the lamp terminal according to the instruction manual, and must be operated by a professional electrician during installation. Please follow the wiring specifications to prevent electric shock accidents.

3. Put the led ceiling light into the ceiling

Install the led ceiling lamp spring buckles on both sides of the product vertically into the ceiling after the opening. Please reconfirm whether the size of the lamp and the opening match. The pre-preparation work directly affects the progress of the follow-up work to a large extent.

4. Put down the spring buckle of the led ceiling lamp 

After confirming the hole size and correct wiring, put down the spring buckles on both sides of the led ceiling lamp. After putting it down, please make sure whether the installation is stable to prevent swinging during the lighting process. For example, in the jewelry lighting process, the lighting effect directly affects sales Case. 

Part of the content of this article has been compiled from the network and shared. If there is any infringement, please contact the editor to delete it.